•You can press the CLEAR button on the remote con- trol unit to delete the most recently programmed track from the program data.
4Press the PLAY button to begin program playback.
Caution
•In this playback mode, playback is not possible unless at least one track has been programmed.
•If you press the STOP button while stopped, all of the program data will be erased.
•If you change the playback mode while stopped, all of the program data will be erased.
•If you turn off the power of the CDR632, all of the pro- gram data will be erased.
Note
•If you attempt to program 100 or more songs, an error message of “PGM Full!” will appear. You can pro- gram a maximum of 99 songs.
•If the total playback time of the programmed tracks exceeds 999 minutes 59 seconds, the display will indi- cate
Shuffle playback
This mode plays all tracks in a random order.
1While stopped, set the playback mode to
“Shuffle”.
For the procedure refer to “Playback modes” (→ p.17).
2Press the 
(play) button on the front panel (or remote control unit).
All tracks will play in a random order, regardless of their track number.
Switching the time display
Here’s how to switch the time display.
DISPLAY button
Press the DISPLAY button on the front panel (or the remote control unit).
Each time you press the button, you will cycle through the following four types of time display. The currently selected display type is shown by the fol- lowing indicators.
4 – Playback—Switching the time display
No indication
The elapsed time of the current track is displayed.
[REMAIN] lit
The remaining time of the current track is displayed.
[TOTAL] lit
The elapsed time of the disc is displayed.
[TOTAL] and [REMAIN] lit
The remaining time of the disc is displayed.
Note
•While stopped, the total recorded time of the disc is always displayed, regardless of how the [TOTAL] and [REMAIN] indicators are lit.
•In program mode, the elapsed time or remaining time of the entire program (not the entire disc) is displayed.
•When playing an MP3 file, the elapsed track time is always displayed. The DISPLAY button is not used.
•For details on the time display during recording or in
Timer playback
Timer playback is a function that automatically starts playback when the power is turned on. By using this function, you can use a commercially available timer to turn on the power of the CDR632, and start play- back at a desired time.
TIMER switch
1Connect the CDR632 to your timer so that power is supplied from the timer to the CDR632.
2Insert the disc that you want to play.
3To turn on the timer playback function, set the CDR632’s TIMER switch to PLAY.
When the timer playback function is on, the timer indicator in the display will light.
Note
The timer indicator will blink if no disc is inserted.
4Set your timer to the desired time.
The CDR632 will turn on at the time specified by your timer, and playback will begin automatically.
ENGLISH
19
