Blomberg IWD 1008 ET, KWD 9440 XA++, IWD 1004 XT Connection of the Water Pipe to the Refrigerator

Water connection to the refrigerator Please follow the instructions below.

Connection of the Water Pipe to the Refrigerator

a

a

b

2

1

c

1.After installing the union onto the water pipe, insert the water pipe to the refrigerator inlet valve by pressing downwards firmly.

2.Fix union as seen in the opposite figure, by squeezing by hand on the refrigerator inlet valve.

(a- Water Pipe, b-Union, c-Valve)

C Note 1: You should not need to tighten the union with a tool to achieve water tight assembly. In case of a leak use a spanner or a pair of pliers to tighten the union.

To fit the water filter follow the instructions below referring to figures supplied:

1.Press ice cancel button on the display.

(Figure 1)

2.Remove the filter cover in the fridge compartment by pulling it forward.

(Figure 2)

15

EN