Manuals / Blomberg / Kitchen Appliance / Freezer

Blomberg KWD 9330 X A+, KWD 9440 XA++, KWD 9440 X A+, IWD 1004 XT, IWD 1004 ET Preparation

Models: IWD 1007 XT IWD 1008 ET IWD 1006 XT IWD 1004 ET IWD 1004 XT KWD 9330 X A+ KWD 9440 X A+ KWD 9440 X KWD 9440 XA++

1 601
Download 601 pages 47.78 Kb
Page 21
Image 21

4Preparation

CYour refrigerator should be installed at least 30 cm away from heat sources such as hobs, ovens, central heater and stoves and at least 5 cm away from electrical ovens and should not be located under direct sunlight.

CThe ambient temperature of the room where you install your refrigerator should at least be 10°C. Operating your refrigerator under cooler conditions than this is not recommended with regard to its efficiency.

CPlease make sure that the interior of your refrigerator is cleaned thoroughly.

CIf two refrigerators are to be installed side by side, there should be at least 2 cm distance between them.

CWhen you operate your refrigerator for the first time, please observe the following instructions during the initial six hours.

-The door should not be opened frequently.

-It must be operated empty without any food in it.

-Do not unplug your refrigerator. If a power failure occurs out of your control, please see the warnings in the “Recommended solutions for the problems” section.

COriginal packaging and foam materials should be kept for future transportations or moving.

20

EN

Page 20 Page 22
Page 21
Image 21
Blomberg KWD 9330 X A+, KWD 9440 XA++, KWD 9440 X A+, IWD 1004 XT, IWD 1004 ET, IWD 1006 XT, IWD 1008 ET Preparation
Page 20 Page 22