Bloomfield 8571, 8540, 8541, 8542, 8573, 8543, 8572, 8574 Access Panels, Servicing Instructions

ACCESS PANELS

Each warmer plate has a center stud which screws into a bracket. Remove warmer plates by turning counter-clockwise.

Solenoid door is held by two screws and a retaining lip.

Front Panel (In-Line Models) and Top / Rear Panel (3-Station Models):

a.Remove warmer plate by turning counter-clockwise until it unscrews.

b.Remove screws from two retaining clips under warmer plate.

c.Lift off panel.

Front Panel (3-Station Models):

a.Remove warmer plates by turning counter-clockwise until they unscrew.

b.Remove screws from two retaining clips under each warmer plate.

c.Remove three screws from bottom-side of front lip.

d.Pull bottom of panel forward until it clears.

Top Panel (All Models):

a.Remove two screws from rear of top panel.

b.Lift rear of panel, remove to rear.

SERVICING INSTRUCTIONS

CAUTION

Electric Shock

Hazard

Opening access panels or removing warmer plates on this brew may expose uninsulated electrical components. Disconnect brewer from electrical power before removing any panel or warmer plate.

Fig. 9 Access Panels

11