OPERATION
OPERATION
8.3 Cutting Component Inspection
Inspect blade pan and blade assembly for the following:
OPS-U-0031
Inspect the Blades daily for abnormal wear. REPLACE BOTH BLADES on that carrier IMMEDIATELY if either blade has:
•Become bent or deformed from it’s original shape or
•Any cracks are visible, or
•Deep gouges in the blades surface are persent, or
•Gouges or chipped areas in the cutting edge are larger than 1/2”, or
•The material on the leading edge has been worn away by more than 1/2”
Failure to replace abnormally worn blades may lead to catastrophic failure of the blades and ejection of the broken part with tremendous force which may cause serious bodily injury or
death.
SE6 05/05 | Operation Section |
© 2005 Alamo Group Inc.
