Blue Rhino FC-0007 manual Figure Asm-R-0081

ASSEMBLY

CHAIN GUARDS (Optional Equipment at extra cost) (Figures Asm-R-0081 & Asm-R-0082)

CHAIN GUARDS: Front and Rear Chain Guards (Optional Equipment) are recommended for higher than normal usage (100 hours or more per year) and will provide protection from thrown objects with careful operation. Chain Guards must be maintained in good repair by replacing missing or worn sections or by being

replaced when seriously worn or damaged.

Rear Chain Guard - (Figure Asm-R-0082)

1.Attach both Deflectors (1 & 2) to deck using 1/ 2" x 1-1/4" Bolts (4) and Locknuts (5). In center of deck use 1/2" x 4" Bolt (7) and Locknut (5) to tie both Deflectors (1 & 2) together. See Figure

Asm-R-0082.

2.Secure Chainguard Assembly (3) to Deflectors (1 & 2) using 1/2" x 1-1/4" Bolts (4), Flatwashers (6), and Locknuts (5).

3.Fasten Rear Plate (8) on both ends of Deflectors (1 & 2) using 1/2" x 1-1/4" Bolts (4) and Locknuts (5). Figure Asm-R-0082.

Front Chain Guards (Figure Asm-R-0081)

1.Attach Chainguard Plate (1) to deck using 5/8" x 1 3/4" Bolts (4), Washers (5), and Locknut (6). 2.Insert the individual Chain Links (2) into slotted holes in Chain Guard Plate (1) and secure in place with Rod (3) as shown in Figure Asm-R-0081. (Complete Chainguard Assemblies are available. See Parts Section in this book.)

3.Attach the corner plate (7) to the side of the deck with a 1/2" x 1-1/2" Bolt (8), and Locknut (9). See

Figure Asm-R-0081

ASSEMBLY

SE6 05/05 Assembly Section 3-9

© 2005 Alamo Group Inc.