BlueAnt Wireless SUPERTOOTH II Xphone, a.ACTIVATING THE BLUETOOTH, c.ANSWERING/RECEIVING A CALL

02 XPHONE

Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest version. You will need to register your device to download updates.

For Xphone go to www.seeo2.com

a.ACTIVATING THE BLUETOOTH

You must activate the Bluetooth feature of your Xphone to establish a Bluetooth connection between your device and other Bluetooth devices.

1.Tap . Scroll down and Tap Settings. Tap Bluetooth.

2.Scroll to On and Tap Done.

b.PAIRING TO THE CELLULAR PHONE

1.Bring your Xphone to within about 20 cm from the SuperTooth.

2.The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º position. The Bluetooth Indicator will glow (blue blink).

3.Simultaneously press the Reject Button and the Pick-Up/Hang-Up Button for about 10 seconds. A tone will be heard and the Bluetooth Indicator LED

will change from blinking blue to alternate blinking red and blue. SuperTooth II is now in Handsfree Pairing Mode.

4.Press the Pick-Up/Hang-Up Button once again for a short time to access Headset Pairing Mode. The SuperTooth is now in pairing mode for Xphone (most important)

5.Tap . Scroll down and Tap Settings. Tap Bluetooth and then Menu.

6.Tap Bonded Devices tab. Tap Menu and then New. (Xphone will now search for devices)

7.Scroll to SuperTooth and select Add.

8.Enter “0000” as the Device PIN and then tap Done.

9.For the question, “This Bluetooth device supports headset profile, would you like to set it as your Bluetooth headset?”, tap Yes.

10.Tap ok, and then exit.

The Handsfree Kit is paired with your Xphone.

c.ANSWERING/RECEIVING A CALL

When the phone is receiving a call, two dissimilar ring tones will be heard from the phone and then from the SuperTooth.

1.When answering is done on the SuperTooth (that is, pressing Send once), audio will be heard on it.

2.When answering is done on the phone, ongoing call will be heard on the phone (not on the SuperTooth). But if you wish to hear and transfer the audio to the Handsfree Kit, just press the Send button once on the SuperTooth.

3.To terminate the call, press down the Pick-Up/Hang-Up Button.

d.MAKING A CALL with the Handsfree Kit on

Normal dialing

With your Xphone you can make a call using different methods. Please refer to your PC Phone’s User Guide.

The most direct method is by using the Phone keypad.

49