4.Why will my Supertooth II not connect when turned on or comes into range (10m)?
•
•
Make sure you are using the correct profile for your phone, Headset or Handsfree.
Some phones will not connect to Supertooth II immediately when in range and require the user to press the
5.Why can’t I hear any sound from the Speaker?
•Make sure the Volume control knob is turned up when making the connection or making a call. This is the simplest solution but often is the most correct.
6.Why is the Supertooth II noisy and distorted?
•Turn Supertooth II Volume knob down to a level that does not give echo or feedback.
•
•
Turn the volume down on your phone and up on the Supertooth II. You may have low antenna strength from your phone network.
Also, some people like to have their phone ring loudly, but this may cause distortion when transferred to the Supertooth II speaker. In your phone, set up a Profile with lower ringing volumes and keypad tones and activate when using with Supertooth II. (see your phones user manual for instructions).
7.Is it safe to use Bluetooth devices, I have heard they can allow unauthorized connections?
•For Bluetooth security reasons, once you have set up your bluetooth devices we recommend turning OFF the visibility option in the Bluetooth Menu of your phone so that other Bluetooth users cannot see the contents of your phone. (This only applies to a few mainly older Bluetooth enabled phones as most new phones have better security.)
69
