2.When answering is done on the phone, ongoing call will be heard on the phone (not on the Supertooth). But if you wish to hear and transfer the audio to the Supertooth, just press the
3.To terminate the call, press down the
Normal dialing
With your Device you can make a call using different methods. Please refer to your PC Phone’s User Guide.
The most direct method is by using the Phone keypad.
1.Press a keypad to bring up the dialer screen.
2.Press the number on the keypad, and then press the green call key.
Note: Audio will be heard directly on the Supertooth. At times, for first time dialing, audio will be heard on the phone and not immediately on the Supertooth. If this is the case you have to press once on the
3. To terminate the call, press down the
Redial
Calls the last number dialed from the phone.
1.Press and hold the
f. AUDIO TRANSFER DURING A CALL
Kit to Phone
Flip down the Swivel Arm to 0º position (or
Phone to Kit
Flip the Swivel Arm up from 0º to 55ºor 210º position
Audio Transfer back to the Supertooth is done by pressing the Jog wheel and selecting Activate Supertooth
g.REJECTING A CALL
Rejecting a call can be done by selecting IGNORE on the phone or pressing the Reject button on the Supertooth II.
h.SETTING THE VOLUME
Setting the volume can be done using the Volume Control.
1.Turn it clockwise to increase the volume.
2.Decrease the volume by turning it
3.Volume can also be adjusted using the phone’s volume control.
Note: If the volume is too high, it can cause feedback (whistling sound), echo or background noise during calls on some cell phones.
17