NOKIA WIRELESS AUDIO ADAPTER AD-5B
The Nokia Bluetooth adapter supports Bluetooth Headset Profile only,
Therefore the Supertooth needs to be placed into Headset Pairing Mode first.
a.PAIRING TO THE CELLULAR PHONE
1.The Supertooth II is initially off. Turn it on by flipping up the Swivel Arm to the 55º position. The Bluetooth Indicator will glow (blue blink).
2.Simultaneously press the Reject Button and the
Pairing Mode.
3.Press the
4.Bring your
5.Insert the Nokia adaptor into the pop port connector of the 7250 etc
6.Reset the Adapter. Press and hold the Control button on the
7.Next, press Once the Control button on the
8.At this point enter the PIN KEY 0000 followed by the # key. Wait a few seconds and a Car icon will appear on your screen.
9.When keys are pressed or when calls made or received audio will transfer to the Supertooth.
The Supertooth is now connected to the Nokia
If you cannot see this symbol, you will need to hit the Control Button to wake the Bluetooth adaptor up as it goes into a sleep mode.
b.ANSWERING/RECEIVING A CALL
When the phone is receiving a call, two different ring tones may be heard from the phone and then from the Handsfree Kit.
1.When answering is done on the Handsfree Kit (that is, pressing Send once on the Supertooth), audio will be heard on it.
2.When answering is done on the phone, ongoing call will be heard on the phone (not on the Handsfree Kit). But if you wish to hear and transfer the audio to the Handsfree Kit, just press the Send button once on the SuperTooth.
3.To terminate the call, press down the
c.MAKING A CALL with the Handsfree Kit on
Normal dialing
With your
The most direct method is by using the Phone keypad.
1.Dial a number on the keypad, and then press Call on the phone. 
41
