BISTRO

INSTALLATION

Place the appliance on a stable flat surface which is neither hot nor near a heat source. The surface must be dry. Keep the appliance and its mains cable out of reach of children.

During use, do not place the base unit on a metal tray or a metal surface.

Ensure that the voltage indicated on the rating plate of the appliance agrees with the mains voltage in your area. Connect the appliance only to a properly earthed power point. (Use of a residual ­current device (RCD) reduces the risk of electric shock, seek the advice of an electrician.) While the appliance is in use, the mains plug must be accessible in case of an emergency. To ensure contin- ued protection against risk of electric shock, connect to properly grounded outlets only.

If the power point is unsuitable for accommodating the plug of your appliance, have the power point changed by a licensed electrician.

SAVE THESE INSTRUCTIONS

PARTS OF THE KETTLE

1Hinged lid

2Button to open the lid

3Scale filter

4Water level gauge

5Reset-Button

6Indicator light

7Base unit

8Max water level indicator

9Min water level indicator

SPECIAL INSTRUCTIONS

POWER-SUPPLY CORD

A short power-supply cord is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.

Extension cords are available and may be used if care is exercised in their use.

If an extension cord is used, the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance, if the appliance is of the grounded type, the extension cord should be grounding -type 3-wire cord. The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.

4

Page 5
Image 5
Bodum 11154 manual Installation, Parts of the Kettle, Special Instructions, POWER-SUPPLY Cord