–Always ensure that you pour out boiling water slowly and carefully, taking care not to tilt the spout too rapidly.
–To prevent scalding, avoid coming into contact with the steam escaping from the opening in the lid when the water is being boiled or just after the kettle has switched off. Be careful when opening the lid, if the kettle is still hot and you wish to refill it with water.
–Boiling water can cause burns.
–Move the appliance with extreme care when it contains hot water.
–Do not forcefully locate the switch in the ON position, or make any authorised changes to the switch in order to make it stay in the ON position. This could lead to steam escaping from around the lid, damaging the automatic
–Never immerse the item in water, remember this is an electrical appliance.
–Only clean the appliance using a damp cloth.
–To disconnect, turn any control to «off» then remove plug from wall outlet.
–Always unplug the appliance by holding the plug, not the cord.
–Do not let cord hang over edge of table or counter, or touch hot surfaces.
–Unplug the power cord from the wall outlet when the kettle is not in use and before cleaning. Allow the kettle to cool before cleaning it.
–Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or adjustment.
–Never attempt to exchange the mains cable of the appli- ance as special tools are required for this. To ensure continued safety of the appliance, if the cable needs to be repaired or exchanged, have this carried out exclusively by a customer service workshop authorised by the manu- facturer.
–To protect against fire, electric shock and injury to persons do not immerse cord, plug, kettle container and power base in water or other liquid.
INSTALLATION
–Place the appliance on a stable flat surface which is neither hot nor near a heat source. The surface must be dry. Keep the appliance and its mains cable out of reach of children.
–During use, do not place the base unit on a metal tray or a metal surface.
INSTRUCTION FOR USE
3
