SAFETY CUT-OFF
The kettle is protected against damage resulting from use with an insufficient volume of water. A safety
Should the kettle ever boil dry during operation, you must leave it to cool for 10 minutes before
BEFORE USING THE KETTLE
Clean the kettle before using it for the first time by filling it completely (to the MAX mark) with water, boiling the water, and then discarding the water.
HOW TO USE THE WATER KETTLE
FILLING THE WATER KETTLE
–Remove the appliance body from the base unit (5).
–Open the lid (1), fill with water and close the lid again.
Do not fill the kettle with less than 0.5l/17oz and not more than 1.5l/51oz (above the MAX mark), to prevent the kettle from boiling dry or boiling water escaping from the spout.
CONNECTION TO POWER SUPPLY
–After filling the kettle, position it on the base unit (5). Ensure that the kettle body is seated correctly on the contact unit on the base unit (5).
–Connect the mains plug to the power supply and raising the ON/OFF switch (4).
Note: Ensure that the ON/OFF switch is able to move freely.
SWITCHING OFF
–Your kettle has an automatic ON/OFF switch and will switch itself off automatically as soon as the water boils.
–You can switch off the kettle at any time by press down the ON/OFF switch (4).
Note: The kettle cannot be switched off by hand if the switch is not free to move, or if the ON/OFF switch is pressed raising.
POURING OUT WATER
–To remove the kettle from the base unit (5), hold it by its handle. Ensure that the kettle body remains level while lifting it from the base unit (5).
–Pour the water from the spout with the lid (1) closed.
Note: Please take care when pouring out water as boiling water can cause scalds.
INSTRUCTION FOR USE
5
