Problem

 

Cause

 

Remedy

 

 

 

 

 

Engine fails to start

1.

Spark plug wire disconnected.

1.

Connect wire to spark plug.

 

2.

Fuel tank empty or stale fuel.

2.

Fill tank with clean, fresh

 

 

 

 

gasoline.

 

3.

Throttle control lever not in

3.

Move throttle lever to start

 

 

correct starting position (if

 

position.

 

 

equipped)

 

 

 

4.

Choke not in ON position.

4.

Move lever to ON position.

 

5.

Blocked fuel line.

5.

Clean fuel line.

 

6.

Faulty spark plug.

6.

Clean, adjust gap, or replace.

 

7.

Engine flooding.

7.

Refer to engine manual.

 

 

 

 

 

Engine runs erratic

1.

Spark plug wire loose.

1.

Connect and tighten spark

 

 

 

 

plug wire.

 

2.

Unit running on CHOKE.

2.

Move choke lever to OFF.

 

3.

Blocked fuel line or stale fuel.

3.

Clean fuel line; fill tank with

 

 

 

 

clean, fresh gasoline.

 

4.

Vent plugged.

4.

Clear vent.

 

5.

Water or dirt in fuel system.

5.

Drain fuel tank. Refill with

 

 

 

 

fresh fuel.

 

6.

Dirty air cleaner.

6.

Clean following engine

 

 

 

 

 

Engine overheats

1.

Engine oil level low.

1.

Fill crankcase with proper oil.

 

2.

Dirty air filter.

2.

Refer to engine manual.

 

3.

Air flow restricted.

3.

Refer to engine manual.

 

 

 

 

 

Tines do no engage

1.

Foreign object lodged in tines.

1.

Stop tiller completely, check

 

 

 

 

and discard foreign object.

 

2.

Tine clevis pin(s) missing.

2.

Replace tine clevis pin(s).

 

3.

Belt worn and/or stretched.

3.

Replace belt.

 

4.

Pulley and idler not in correct

4.

Take unit to authorized

 

 

adjustment.

 

 

 

 

 

 

 

8

Trouble

Shooting

For repairs beyond the minor adjust- ments listed here, contact an authorized service dealer.

13

Page 13
Image 13
Bolens 241 warranty Trouble Shooting, Problem Cause Remedy