SECTION 1: IMPORTANT SAFE OPERATION PRACTICES

WARNING: THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH, IF NOT FOLLOWED, COULD ENDANGER THE PERSONAL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS. READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE YOUR CHIPPER-SHREDDER. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. WHEN YOU SEE THIS SYMBOL: HEED ITS WARNING.

WARNING: The Engine Exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.

DANGER: Your chipper-shredder was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This chipper-shredder is capable of amputating fingers and hands and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

1. GENERAL OPERATION

Read this operator's manual carefully in its entirety before attempting to assemble this machine. Read, understand, and follow all instructions on the machine and in the manual(s) before operation. Be completely familiar with the controls and the proper use of the machine before operating it. Keep this manual in a safe place for future and regular reference and for ordering replacement parts.

Your chipper-shredder is a powerful tool, not a plaything. Therefore, exercise extreme caution at all times. Your unit has been designed to perform two jobs; to chip and shred vegetation found in a normal yard. Do not use it for any other purpose.

Never allow children under age 16 to operate the unit. Children 16 years and older should only operate the unit under close parental supervision. Only responsible individuals who are familiar with these rules of safe operation should be allowed to use your unit.

Keep the area of operation clear of all persons, particularly small children and pets. Stop the engine when they are in the vicinity of the unit. Keep work area clean and clear of branches or obstacles which could cause you to stumble or fall.

When feeding material into this equipment, be extremely careful that pieces of metal, rocks, bottles, cans or other foreign objects are not included. Personal injury or damage to the machine could result.

Wear sturdy, rough-soled work shoes and close fitting slacks and shirt. Shirt and slacks that cover the arms and legs and steel-toed shoes are recommended. Do not wear loose fitting clothes or jewelry and secure hair so it is above shoulder length. They can be caught in moving parts. Never operate a unit in bare feet, sandals or sneakers. Wear gloves when feeding material in the chipper chute or shredder hopper.

Always wear safety glasses or safety goggles, during operation and while performing an adjustment or repair, to protect eyes from foreign objects that may be thrown from the machine.

Never place your hands, feet, or any part of your body into the shredder hopper, chipper chute, discharge opening, or near any moving part while the engine is running. Keep clear of the discharge opening at all times. If it becomes necessary to push material into the chipper chute or shredder hopper, use a small diameter stick, NOT YOUR HANDS.

If it is necessary for any reason to unclog the feed intake or discharge openings or to inspect or repair any part of the machine where a moving part can come in contact with your body or clothing, stop the machine, allow it to cool, disconnect the spark plug wire from the spark plug and move it away from the spark plug before attempting to unclog, inspect or repair.

Do not operate unit while under the influence of alcohol or drugs.

The machine should only be operated on a level surface. Never operate your unit on a slippery, wet, muddy or icy surface. Keep your work area clean and clear of branches or obstacles which could cause you to stumble and fall. Do not overreach. Maintaining proper footing and balance is essential to preventing accidents.

Do not allow an accumulation of processed material to build up in the discharge area as this will prevent proper discharge and can result in kickback from the chipper chute.

Keep your face and body back from chipper chute to avoid accidental bounce back of any material.

Do not transport machine while engine is running.

2

Page 2
Image 2
Bolens 462 Thru 465 manual Important Safe Operation Practices, General Operation

462 Thru 465 specifications

The Bolens 462 through 465 series represents a significant advancement in the realm of garden tractors, embodying a blend of rugged durability and innovative technology. Designed for both residential and light commercial use, these compact tractors showcase an array of features that enhance their appeal among gardening enthusiasts and landscapers alike.

One of the standout characteristics of the Bolens 462 to 465 models is their robust engine lineup. Equipped with powerful air-cooled, four-stroke engines, these tractors deliver reliable performance whether handling simple lawn care tasks or more demanding garden work. This power is complemented by a smooth hydrostatic transmission, allowing for seamless speed adjustments and ease of operation, making it ideal for navigating tight spaces and varied terrains.

The design of these tractors reflects a commitment to user comfort and ergonomic operation. The adjustable seat offers excellent support, while the intuitive control layout enables operators to easily reach all functions without unnecessary strain. Additionally, features like power steering ensure that maneuvers are smooth and fatigue is minimized during extended use.

When it comes to versatility, the Bolens 462 through 465 excel, with several optional attachments available, including mowing decks, snow throwers, and tillers. This adaptability makes them suitable for year-round use, allowing users to tackle a wide range of tasks from mowing adjacent lawns to snow removal in the winter months.

Another key feature of these tractors is their durable construction. Built with a strong steel frame and quality components, the Bolens series is designed to withstand the rigors of outdoor work. The wider wheelbase provides stability, especially when operating on uneven ground, ensuring a comfortable experience even in challenging conditions.

Technologically, these models integrate user-friendly features such as easy-to-read dashboards that display essential information like fuel levels and engine performance. Maintenance is also simplified through easily accessible components, allowing for quicker service and upkeep.

In summary, the Bolens 462 through 465 series exemplifies the perfect intersection of power, versatility, and user comfort. With a focus on reliability and innovative design, these tractors are more than capable of meeting the demands of today’s gardeners and landscapers while providing an enjoyable user experience.