SECTION 3: FINDING YOUR MODEL NUMBER
This Operator’s Manual is an important part of your new
Before you prepare your
•Every chipper shredder has a model plate. You can locate it by standing behind the unit in the operating position and looking down at the frame next to the engine.
•The model plate will look like this.
This is where your model number will be.
This is where your serial number will be.
| Copy the model number here: | |||
MTD PRODUCTS INC | Copy the serial number here: |
|
|
|
CLEVELAND, OHIO 44136 |
|
|
| |
|
|
|
SECTION 4: CALLING CUSTOMER SUPPORT
If you are having difficulty assembling this product or if you have any question regarding the controls, operation or maintenance of this chipper shredder, please call the Customer Support Department. You can reach them by calling:
Before you call, make sure that you have both your model and serial number ready. By having the model and serial number ready, you help the Customer Support Representative give you faster service. To find your units model and serial number, see SECTION 3: FINDING YOUR MODEL NUMBER.
SECTION 5: UNPACKING INSTRUCTIONS
REMOVE UNIT FROM CARTON
•Remove staples, break glue on top flaps, or cut tape at carton end and peel along top flap to open carton.
•Remove loose parts included with unit (i.e., owner’s manual, etc.).
•Cut along dotted lines and lay carton down flat.
•Remove packing material.
•Roll or slide unit out of carton. Check carton thoroughly for loose parts.
5