Bosch Appliances LBB4173, 0 Specifying intercom settings, Ring Tone, Logging intercom activity

DCN Next Generation Intercom

en 13

3.4 Specifying intercom settings

You can specify intercom-related parameters using the ‘Settings’ menu. The ‘Settings’ menu is accessed from the main window, and has two options:

•Ring Tone

•Intercom Activity

3.4.1 Ring Tone

This option allows you to enable or disable an audible tone that sounds every time an intercom call is made to the operator. The default state is ‘enabled’. To disable the tone:

•Select the ‘Settings’ menu and click on ‘Ring Tone’.

The tick mark (√) will subsequently disappear, indicating that the ring tone has been disabled. To turn the ring tone back on:

•Select the ‘Settings’ menu and click on ‘Ring Tone’ again.

The tick mark (√) will subsequently appear, indicating that the ring tone has been enabled again.

3.4.2 Logging intercom activity

This option allows you to enable or disable the logging of all intercom activity. You can also specify the name of the file where logging information will be stored. To do so:

•Select the ‘Settings’ menu and click on ‘Intercom Activity’.

The following dialogue box appears:

Figure 10 The ‘Intercom Activity’ dialogue box

The ‘Logging’ radio buttons allow you to enable or disable intercom activity logging. The default state is ‘off’. To enable logging:

•Click on the ‘On’ radio button.

A black circle will appear to indicate this option has been selected.

To disable logging again:

•Click on the ‘Off’ radio button.

The ‘Send To File’ edit field allows you to specify the destination file of the logging activity. You can enter a file name, which must be a valid MS-DOS name no longer than eight characters. To do so:

•Click on the ‘Send To File’ text box.

•Type in the file name.

If you enter an invalid filename and/or location, or do not enter one at all, a warning message with the following text is displayed:

‘Invalid filename’

•Click on the ‘Ok’ push button.

You will return to the dialogue box and can enter a valid filename and/or location.

iNote

The destination file(s) for Intercom activity logging are located in the DCNNG\Iclog directory.

iNote

It is possible to print an intercom activity file. To do so, please refer to paragraph 4.3.

Once you have finished specifying all parameters in the ‘Intercom Activity’ dialogue box:

•Click on the ‘Ok’ push button.

Any changes made will be saved, and you will return to the main window.

Bosch Security Systems B.V. 2005 January 9922 141 70371