Bosch Appliances 9000065778(8503) manual Disconnecting the dishwasher, Transporting the dishwasher

Disconnecting the dishwasher

Here too, it is important that tasks are carried out in the correct sequence: always unplug the appliance from the mains electricity first of all.

Pull plug out of wall socket. Turn off water supply.

Disconnect drain and water input hoses. Remove screws in underside of work surface. Detach base board, if fitted. Pull out appliance and carefully withdraw hoses at same time.

Transporting the dishwasher

Drain water from the dishwasher. Secure all loose parts. The appliance should only be transported in an upright position.

If the appliance is not kept upright during transport, any water left inside may seep into the control module and cause subsequent errors with programme functions.

Transporting the dishwasher

Drain water from the dishwasher. Secure all loose parts. The appliance should only be transported in an upright position.

If the appliance is not kept upright during transport, any water left inside may seep into the control module and cause subsequent errors with programme functions.

Drain the appliance according to the following steps:

Turn on the tap. Close the door.

Select Normal 45_ programme. Switch on the main switch. Wait until approx. 4 minutes have elapsed.

Rotate programme selector to the Reset position.

After another minute switch off the appliance.

Turn off the tap.

aus

Protection from freezing temperatures

If the appliance is installed in a location where there is a risk of freezing temperatures (e.g. in a holiday home), all water must be completely drained out of the interior (see ªTransporting the dishwasherº).

Turn OFF the tap, disconnect the supply hose and allow to drain.

25