CCS 800 Ultro Installation and Operating Manual
en 6
3Control and power supply unit (CPSU)
|
| CC |
|
|
|
|
|
|
|
|
|
| S 800 | ULTRO |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1 |
|
| 2 |
|
|
|
|
|
|
|
|
|
| 3 | 4 |
|
|
|
|
| |
|
|
|
|
| 5 |
|
|
| ||
|
|
|
|
|
| 6 |
|
| ||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| |
Trunk in/out | Microphone |
| Recorder |
| Line | Telephone Insertion |
|
|
| |
|
|
|
|
|
|
|
| In |
|
|
|
|
| Gain Gain |
|
|
|
| Out | Digital Acoustic |
|
|
|
|
|
|
|
|
| Feedback Suppression |
| |
|
|
|
|
|
|
|
|
|
| |
7 |
| 8 | 9 |
| 11 |
| 13 | 14 | ||
|
|
|
|
| 10 | 12 |
|
|
|
Figure 3.1
1 Mains On/Off switch.
2Power On LED indicator (green).
3
Open mode with auto
to be activated simultaneously (1, 2, 3 or 4). The microphone automatically switches off if the speaker does not speak for 30 seconds.
The microphone can manually be switched off by pushing the button on the delegate unit. Open mode. To select the maximum number of delegate microphones to be activated simultaneously (1, 2, 3 or 4). The microphone must be switched on or off manually by pushing the button on the delegate unit.
Override mode. Only one delegate microphone can be activated. If a new delegate presses his microphone button, the microphone unit of the current speaker will be switched off. Chairman only mode. Only the chairman units can be activated.
Test mode. For proper installation check. All the
4 Speaker volume control of all connected delegate and chairman units.
5Volume control of the speaker or headphone of the CPSU.
6Headphone connection with 3.5 mm stereo jackplug socket.
7Trunk output 1 and 2. For loopthrough connection of the delegate and chairman units. To each output a maximum of 25 units can be connected.
The maximum length of cable between the outputs of the CPSU and the last unit in the system is
100 m (328 ft).
8Microphone input with gain adjustment for external microphone. The external microphone will be muted when the priority button on the chairman unit is pressed.
9Recorder input with gain control and recorder output connection.
10Line input and output for connecting a
11Telephone coupler input and output for connecting a remote participant.
Note
The telephone input signal to the CPSU is not added to the telephone output signal from the CPSU to prevent line echo due to feedback.
12Insertion connection. To connect an external audio equalizer for speech quality improvement under difficult acoustic conditions (1 = without equalizer, 0 = insertion connection is internally open, providing means to connect an external equalizer in the path from microphone signals to delegate/ chairman loudspeakers).
Note
Position "1" required for internal
13Digital Acoustic Feedback Suppression (DAFS) switch to activate or deactivate the DAFS.
Bosch Security Systems