CCS 800 Ultro Installation and Operating Manual
en 8
5.2 Connecting up to 150 units
CCS 800 Ultro can be used with up to 150 units by adding maximum 2 additional control units acting as power supply units only. The system is controlled by the master LBB 3310. The cables necessary for these connections can be delivered by your local dealer.
|
|
| max. 6 x 25 units |
CCS 800 | ULTRO |
|
|
|
|
| |
| CCS 800 | ULTRO |
|
|
| CCS 800 | ULTRO |
|
|
| |
Figure 5.2 |
|
|
5.3 Locking the extension cable
Figure 5.3
Cable locking clamps can be used in combination with the extension cables to prevent accidental disconnection.
5.4Connecting an external microphone
Trunk in/out | Microphone | Recorder | Line | Telephone | Insertion |
|
1 |
|
|
|
| In |
|
Gain | Gain |
|
| Out | Digital Acoustic | |
|
| Feedback Suppression | ||||
|
|
|
|
|
| |
| 3 |
|
|
|
|
|
| 2 |
|
|
|
|
|
Figure 5.4
Put the external microphone (2) connector in the microphone input of the CPSU (1).
Adjust the sensitivity by use of the gain control (3). Use only microphones with balanced output.
The microphone input provides a 12V phantom power supply.
Bosch Security Systems