Manuals / Bosch Appliances / Household Appliance / Smoke Alarm

Bosch Appliances DS9400 manual Bosch Security Systems 8/06

Models: DS9400

1 8
Download 8 pages 35.95 Kb
Page 5
Image 5

DS9400 Series Release Notes for Firmware V2.07 7.0

Fixed Items Since Firmware Version 1.08

 

 

•Manual Battery/NAC Test during AC Fail: Manually initiating a battery test (Test Menu, Option 4) when AC has failed will now correctly display the current battery voltage. However, if a user at the control panel requests a manual battery test within five seconds after AC power fails, the system may shut down until AC power returns. Manual battery test while AC is present will correctly test and report the battery voltage, and a manual test when AC power has failed will report the current battery voltage.

•Improved Smoke Power Control Monitoring: When AC power fails, the control panel draws from the batteries to maintain operation. When the battery voltage falls below 20 volts, the control panel will shut down. Panels with date codes after 9935 will power down, and control panels modified according to Technical Service Note P/N: 42363 will enter a low power idle state. To ensure that all attached smoke detectors are correctly powered up after a shutdown, the control panel will wait for the smoke power voltage to stabilize before applying smoke power and continuing operation.

To ensure that power is applied cleanly to the smoke detectors, smoke power is now turned off if it falls below 15 volts and not restored until it reaches 20 volts.

•Improved Battery Monitoring: Processing of restored batteries has been improved so that a RESET operation is never required.

•Local Only Points Implemented: Central station reporting is now correctly suppressed for points programmed for “Local Only” operation.

•Response Time After Transients: Firmware prior to version 2.02 may allow an extended alarm response time after an electrical transient (e.g. lightning). In the worst case, an alarm occurring 10 minutes after a transient would take 10 minutes to be registered. After 10 minutes, the response time returns to normal. With version 2.02 firmware, response time correctly remains at 500 ms for fast response, or at the desired programmed response time for programmed response points, regardless of possible prior transients on the line. This issue was observed during recent lab testing of the control panel and has not been reported from actual installations, but upgrading the firmware in installed control panels to version 2.02 will assure proper response time under all circumstances.

•Programming Access: Firmware version 2.02 corrects a configuration problem found in control panels with prior firmware that improperly allows programming access to all valid user codes and not only “Level 1/Maximum” codes.

•Phone Troubles: On a small number of DS9400 units, when using firmware prior to version 2.02, an interaction between normal hardware variations and firmware timing has been observed to cause the control panel to falsely report a disconnected phone line. On the small number of control panels with the affected hardware, the fault causes occasional phone trouble reports that are followed by an immediate restoral report. Replacing the ROM to upgrade the firmware to version 2.02 corrects the problem with no need for hardware modifications.

•User Interface Delay: Under unusual circumstances, the user interface in firmware prior to 2.02 would stop accepting input for up to three minutes if remote keypads were present on a system. This no longer occurs in version 2.02.

•Relay Module Operation, Disabling: Remote relay modules may fail to activate properly under some circumstances in firmware versions prior to 2.02. Additionally, attempting to disable remote relays has caused the control panel to stop operating and freeze the display. The relay modules operate and can be disabled as expected in version 2.02. Note that when a remote relay module is disabled, all eight relays on the module are disabled with one operation.

•Auto Silence Clarification: When configuring points and NACs for auto silence, the setting on each NAC to enable or disable the auto silence feature is not implemented. Setting the timer to a value other than zero (0) enables the auto silence feature. Any NAC that can be silenced (based on which inputs are in alarm) will be silenced when the auto silence timer completes, regardless of the setting selected for the individual NACs. Additionally, a NAC activated by a non-latching point will not automatically turn off when the point restores if there is any other off-normal condition on the control panel. It must be manually reset.

Bosch Security Systems 8/06 36925V

5

Page 4 Page 6
Page 5
Image 5
Bosch Appliances DS9400 manual Bosch Security Systems 8/06
Page 4 Page 6

DS9400 specifications

The Bosch DS9400 is a premier dishwasher designed to meet the contemporary needs of modern households, combining cutting-edge technology with sleek design and unparalleled performance. Known for its efficiency and innovative features, the DS9400 is a valuable addition to any kitchen.

One of the standout features of the Bosch DS9400 is its exceptional quiet operation. With a noise level as low as 42 decibels, it ranks among the quietest dishwashers available. This discreet performance allows you to run the dishwasher at any time without disrupting your household activities or conversations.

The DS9400 is equipped with advanced Sensory Technology, which optimizes every wash cycle based on the load's soil level and type. This intelligent system automatically adjusts the water usage, temperature, and cycle time to ensure a thorough clean while conserving resources. As a result, it not only delivers sparkling dishes but also enhances water and energy efficiency.

Another remarkable feature is the flexible loading system. The Bosch DS9400 boasts an adjustable third rack, allowing for maximum loading flexibility. This innovative design provides ample space for utensils and small items, ensuring all pieces are cleaned effectively. Additionally, the racks are designed with rubberized coatings to hold items securely in place during operation.

The dishwasher includes a variety of wash cycle options, accommodating various cleaning needs. From a speedy 30-minute Wash and Hold cycle to a Heavy cycle for heavily soiled pots and pans, users can easily select the best option for their load. The Sanitize option ensures that harmful bacteria are eliminated, providing peace of mind alongside sparkling clean dishes.

Moreover, Bosch has integrated smart technology into the DS9400, enabling users to control the appliance via a smartphone app. This feature allows for remote monitoring, cycle programming, and notifications of completion, offering convenience for those with busy lifestyles.

In terms of design, the Bosch DS9400 reflects modern aesthetics with a stainless steel finish and a sleek, integrated handle. The interior is also thoughtfully crafted with a streamlined appearance, featuring a soft-close door that enhances usability and durability.

In conclusion, the Bosch DS9400 dishwasher combines powerful performance with innovative features and design excellence. Its quiet operation, flexibility in loading, smart technology, and efficient cleaning make it a top choice for those seeking a reliable appliance that meets the demands of a modern kitchen. Whether you're washing delicate glassware or heavy-duty cookware, the Bosch DS9400 stands out as an appliance that delivers exceptional results every time.