Bosch Appliances F01U032279 installation and configuration manual Setting the Address ID

8 Address (ID)AutoDome Easy

6	Address (ID)
	Each AutoDome Easy camera must have a unique address (ID). When installing multiple dome
	cameras using a DVR, it is suggested that the dome camera address match the DVR input num-
	ber (for example: Input 1 = Dome 1, Input 2 = Dome 2, etc...). Set a unique camera address
	(ID) using the switch selections inside the bubble.
6.1	Setting the Address (ID)
	To set the unique AutoDome Easy ID address, do the following:
	1.	Loosen the bubble’s four (4) tamper-resistant screws using the torx wrench provided.
	2.	Carefully lift the bubble and set it aside.
	3.	Locate the SW501 switch.
	4.	Set the switches based on Table 6.1.

Fig. 6.1 Setting the AutoDome Easy Address (ID)

December 06, 2006 F01U032279 Installation and Configuration Manual Bosch Security Systems, Inc.