AutoDome EasyProgram and Operation 15
10 Program and Operation
The AutoDome Easy is programmed through the
10.1Menu Navigation
| To access the OSD menus, open the Main menu by pressing ON + 4 + 6 + ENTER. |
| |
|
|
| |
i | NOTICE! The main menu can not be accessed when an auto pan or preset tour is running. |
| |
Press the joystick in any direction to stop the tour or auto pan. |
| ||
|
| ||
|
| ||
| Use the joystick to navigate through the menu. To navigate throughout the OSD menus, do the | ||
| following: |
| |
| • | To scroll through the parameters, move the joystick up and down . |
|
| • | To edit the parameters or enter a submenu, move the joystick left and right | . |
•To exit the submenu, move the cursor to EXIT, then move the joystick to the right
.
10.2Main Menu
The Main menu provides access to all programmable AutoDome Easy settings. Press ON + 4 + 6 + ENTER to display the Main menu.
MAIN MENU
PRESET
TOUR
AUTO PAN
SECTOR
ALARM
CAMERA SETUP
DOME SETUP
EXIT
Menu | Description |
|
|
Preset | |
| set view to be recalled. Also known as preset shot. |
|
|
Tour | Accesses a sequence of preset shots combined to provide a |
| of the area covered by an AutoDome Easy camera. |
|
|
Auto Pan | Accesses a range of |
|
|
Sector | Breaks the total 360 degrees into eight sectors of 45 degrees each. Individual titles |
| may be assigned to each sector. |
|
|
Alarm | Accesses the alarm settings such as: input type, timeout options, and dwell time. |
|
|
Camera Setup | Accesses adjustable camera settings such as: white balance, gain, sharpness, sync, |
| backlight, and shutter. |
|
|
Dome Setup | Controls miscellaneous dome operations such as: OSD, auto pivot, home function, |
| and initialization (reset to factory defaults). |
|
|
Exit | Exits the menu without saving the data. |
|
|
Bosch Security Systems, Inc. | Installation and Configuration Manual | December 06, 2006 F01U032279 |