Networking Cards Installation | en 11
Bosch Security System, Inc. Installation Manual F.01U.214.374 | 01 | 2012.08
4 Installation

4.1 General considerations

4.2 Mounting

The main board allows for the installation of one networking card.
1. Position the networking card along the bottom of the mainboard keypad with the
connections aligned with the slot.
2. Press down softly until the snap-fit hook locks into place ensuring that the connections
seat into the slot properly.
CAUTION!
Electrostatic discharge!
Ground yourself using a wrist strap or take other suitable actions.
The FPA-1000 circuit boards have static-sensitive components that could become damaged.
Run the ground wire to the enclosure before handling these circuit boards. Touch ground
before unpacking and handling the circuit boards. This discharges any static electricity in your
body. Continue touching the enclosure while installing the circuit boards.
DANGER!
Before installing the networking card, remove all AC and battery power from the fire panel.