14 en ConnectionNetworking Cards
Terminal |
| Specifications Class A Style 7 |
|
|
|
Wired OUT+/- | Terminals used for outgoing loop | |
|
|
|
| Wired IN+/- | Terminals used for return loop |
|
|
|
Table 5.2 Specifications SLC Terminals Class A Style 7
Additional notes regarding Class A Style 7:
1.No
2.The return side of the loop must be routed separately from the outgoing loop.
3.The return side must not share the same conduit or cable as the outgoing side of the loop.
4.Refer to NFPA 72 for additional requirements of Class A circuits.
Figure 5.1 Network Connections Example
Legend
1
2
3
4
5
Wire to Wire connection
Wire to Ethernet connection
Ethernet to Fiber Optic connection
Fiber Optic to Fiber Optic connection
Class A connection (Ethernet to Ethernet in this example)
NOTICE!
The network does not require an EOL resistor.
F.01U.214.374 01 2012.08 | Installation Manual | Bosch Security System, Inc. |
