Bosch Appliances HGS3023UC Stopping or interrupting a self-clean cycle, Avoid These Cleaners

Models: HGS3023UC

1 96
Download 96 pages 54.54 Kb
Page 23
Image 23
When the self-clean cycle has completed:

light will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock).

When the self-clean cycle has completed:

1.The time of day will appear in the display window and the “Clean” and "LOCK" light will continue to glow.

2.Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.

3.A moist cloth is the best way to wipe out the remaining ash from the oven.

Stopping or interrupting a self-clean cycle

If it becomes necessary to stop or interrupt a self- cleaning cycle once it has been activated:

1.Press “Clean/Off”.

2.Once the oven has cooled down for about 1 HOUR and the "LOCK" light has turned off, the oven door can be opened.

3.Restart the Self-Clean cycle once all conditions have been corrected.

CAUTION:

• To avoid possible burns use care when opening the oven door after the self- cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid possible burns when opening the door after the self-cleaning cycle has completed. The oven may still be VERY HOT.

Note:

Whenever the self-clean feature is active you may check the amount of time remaining in the self-clean cycle by pressing the “Self Clean” pad. Remember the range door cannot be opened until the range has cooled sufficiently. You will need to add about 1 hour to the time displayed before you can use the range for cooking.

When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.

Avoid These Cleaners

Do not use commercial oven cleaners such as Easy Off®. They may damage the oven finish or parts.

Never use scouring pads or abrasive cleaners.

Cleaning Guide

Part

Recommendations

 

 

 

 

Oven Rack

Wash with hot soapy water. Rinse

 

thoroughly and dry, or gently rub

 

with cleansing powder or soap-filled

 

pads as directed. DO NOT clean the

 

rack in the self-cleaning oven.

 

If the racks are cleaned in the oven

 

during the self clean mode, they will

 

loose their shiny finish and may not

 

glide smoothly. If this happens, wipe

 

the rack edges with a small amount

 

of vegetable oil. Then wipe off

 

excess.

 

 

Fiberglass

DO NOT CLEAN GASKET.

Gasket

 

 

 

Glass

Wash with soap and water or glass

 

cleaner. Use Fantastik® or Formula

 

409® to remove grease spatters and

 

stubborn stains.

 

 

Painted

Clean with hot soapy water or apply

Surfaces -

Fantastik® or Formula 409® to a

Control Panels

clean sponge or paper towel and

and Display

wipe clean. Avoid using powder

Areas

cleaning agents, steel wool pads

 

and oven cleaners.

 

 

Porcelain

Immediately wipe up acid spills like

Surfaces

fruit juice, milk and tomatoes with a

 

dry cloth. Do not use a moistened

 

sponge/cloth on hot porcelain. When

 

cool, clean with hot soapy water or

 

apply Bon-Ami® or Soft Scrub® to a

 

damp sponge. Rinse and dry. For

 

stubborn stains, use soap-filled

 

pads. It is normal for porcelain to

 

show fine lines with age due to

 

exposure to heat and food soil.

 

 

English 20

Page 23
Image 23
Bosch Appliances HGS3023UC manual Stopping or interrupting a self-clean cycle, Avoid These Cleaners, Cleaning Guide, Part