DCN Voting Units Installation and User Instructions
en 9
The LBB 4141/50 Chinese voting unit can be used for attendance registration, parliamentary voting and for/against voting.
2.8.2 Locating Buttons by Touch
The pimple beneath the button in the middle of the voting unit allows users, especially visual impaired to quickly locate the voting buttons by touch (see Figure 2.1 and Figure 2.2)
2.8.3 Unit Active Indication
The blue unit active indicator illuminates in normal operation (see Figure 2.16 and Figure 2.17). If the unit active indicator flashes or does not illuminate, see paragraph 2.9.1 for troubleshooting.
Figure 2.16 Unit Active Indication LBB 4141/00
Figure 2.18 Presence Registration LBB 4141/00
Figure 2.19 Presence Registration LBB 4141/50
In case the option “registration at entrance/exit unit” is selected, the voting unit will stay inactive until the delegate assigned to that unit is registered present (e.g. registered with a chip card).
2.8.5 Voting Authorization and Access Control
A PC is required for voting authorization and access control. The operator specifies whether individual delegates are allowed to take part in electronic voting and initiates access control. See the manual of LBB 3580 Delegate Database and LBB 3578 Attendance Registration and Access Control.
Figure 2.17 Unit Active Indication LBB 4141/50
2.8.4 Attendance Registration
A PC is required for attendance registration. The operator initiates attendance registration. See the manual of LBB 3578 Attendance Registration and Access Control.
The LED above the present button flashes, in case the option “registration at seat by present key” is selected (see Figure 2.18 and Figure 2.19). To register presence, presses the present button. The LED goes out.
In case access control is enabled for voting, the voting unit will stay inactive if the delegate assigned to that unit has no voting authorization.
2.8.6 Voting
The user interaction of the voting units in a stand- alone system is described in this paragraph. See the manuals of LBB 3575 Parliamentary Voting and LBB 3576 Multi Voting for other options.
The chairman initiates the voting session. The LED above the present button starts to flash (see Figure 2.18 and Figure 2.19).
To register presence, press the present button. The LED above the present button goes out and the LEDs above the yes (green, +), no (red,
