8 en Product information | LE10 Radio Receiver | ||
|
|
|
|
|
|
| |
Mode | Name | Description | |
|
|
| |
4 | Dementia with | This mode allows to connect the LE10 Radio | |
| Accompany | Receiver to a wired emergency call system, in | |
|
| which the Accompany function can be | |
|
| implemented. It will wait 10 seconds after | |
|
| receiving a signal from a MIYS37L transmitter. | |
|
| If it detects a MIYS37E transmitter in this lapse | |
|
| of time, no alarm is generated. If not, Relay 1 is | |
|
| activated for 2 seconds. | |
|
|
| |
5 | Remote control | 20 wireless transmitters can be programmed. | |
|
| Per sequence, only the same transmitter can | |
|
| switch on and off the Relay1. A | |
|
| signal is indicated by the red LED and Relay 2. | |
|
|
| |
6 | Open receiver | No wireless transmitter needs to be | |
|
| programmed. Any transmitter within reception | |
|
| range of the LE10 Radio Receiver can activate | |
|
| the device. | |
|
|
| |
7 | Open receiver with | Same functions as in mode 6, but with | |
| reduced range | reduced range. This functionality is designed | |
|
| to improve reception of transmitters located | |
|
| closer to the LE10 Radio Receiver. | |
|
|
| |
8 | Extended MIYN46 | Additional MIYN46 transmitters can be | |
| transmitter | programmed. Behavior is similar to normal | |
| programming | mode 1, with certain differences according to | |
| (only with SW 1.10) | the transmitter that is activated. | |
|
|
| |
9 | Dual channel receiver | Only MIYS37 wireless transmitters can be | |
| (only with SW 1.10) | programmed. Calls are indicated by Relay 1 or | |
|
| Relay 2, according to the slot in which the | |
|
| MIYS37 wireless transmitter is programmed. A | |
|
| ||
|
|
|
|
|
|
|
|
NOTICE!
Factory setting is normal mode 1, in which 20 wireless transmitters can be programmed. Calls are indicated by the red LED and Relay 1. A
F.01U.278.517 V2.0 2012.11 | User Manual | Bosch Security Systems |
