DinionXF Installation Manual
EN 21
menu, the current area is displayed with the upper left corner flashing. The flashing corner of the image can be moved with the Up, Down, Left, Right arrow keys. Pressing the Select key moves the flashing cursor to the opposite corner, which can now be moved. Pressing Select again freezes the area and exits the area menu.
Video Motion Detection (VMD) submenu
Function | Selection | Description |
VMD | OFF, SIL, OSD | When VMD is enabled and the camera can |
|
| generate SIL (silent) or OSD (monitor alarm |
|
| generates |
|
|
|
AREA | 1, 2, 3, 4, | • It is possible to set 4 motion sensitive areas (per |
| Select submenu | MODE). |
|
| • Press SELECT to enter the area |
ACTIVE | ON, OFF | Every area can be enabled individually by |
|
| selecting YES. |
|
|
|
MOTION | Press SELECT to | Indicates the peak of measured motion in the |
| reset indicator | selected area |
SENS |
| Use the LEFT/RIGHT keys to set the SENSitivity |
|
| for motion to the desired level. Motion above this |
|
| level triggers alarm. |
|
|
|
EXIT |
| Return to Mode menu |
|
|
|
Note
If VMD areas overlap, motion is only detected in the area with the lowest sequence number.
Defaults submenu
Function | Selection | Description |
MODE |
| Select to restore the factory defaults. A |
DEFAULTS |
| confirmation screen appears. Allow 5 seconds for |
|
| the camera to optimize the picture after a mode |
|
| reset. |
|
|
|
EXIT |
| Return to Mode menu |
|
|
|
Bosch Security Systems