Bosch Appliances LTC 0620, LTC 0495 Advanced Set-up, Accessing and navigating menus

DinionXF Installation Manual

EN 13

Advanced Set-up

The DinionXF Day/Night normally provides an optimal picture without the need for further adjustments. However, advanced set-up options are available for getting the best results from the camera under special circumstances. There are two main menus; a Mode menu and an Installer menu.

The camera has three pre-programmed operating modes that can be selected in the Mode menu. These modes are pre-programmed by default but you can adjust them according to your preferences. The Mode menu allows you to select and set-up the picture enhancement functions for each mode. If you are not happy with your changes, you can always recall the default values for the mode.

The camera also has an Installer menu in which the installation settings can be set.

The Mode and Installer menus have functions that can be selected directly or submenus for more detailed set-up.

Accessing and navigating menus

Five keys, located behind the side panel, are used for navigating through the various menus.

To access the set-up menus, press the menu/select key (center).

Bosch

Bosch

The main menu appears on the OSD. Use the arrow keys for navigation.

When the Bilinx™ communications link is active, the buttons on the camera are disabled. You can also set up Bilinx™ so that the camera buttons remain disabled even when Bilinx™ is not actively controlling the camera. This prevents unauthorized change of the camera settings.

Bosch Security Systems 2004-01 V1.0