DinionXF Installation Manual
EN 25
Install ID submenu
Function | Selection | Description |
CAMERA ID |
| Enter a 16 character camera name string. Use |
|
| LEFT/RIGHT to change position in the string, use |
|
| UP/DOWN to select the character. Use SELECT |
|
| to exit the string edit screen. |
|
|
|
ID POS | OFF, TOP, BOT | Select TOP to display the camera ID in the upper |
|
| left corner; select BOT for the lower left corner. |
|
| The ID string is not displayed when the OSD |
|
| menus are open. |
EXIT |
| Return to the INSTALL menu |
|
|
|
Defaults submenu
Function | Selection | Description |
ALL |
| Select to restore the factory defaults. A |
DEFAULTS |
| confirmation screen appears. Allow 5 seconds for |
|
| the camera to optimize the picture after a mode |
|
| reset. |
|
|
|
EXIT |
| Return to Mode menu |
|
|
|
Camera Control Communication
This camera is equipped with a coaxial communications transceiver. In combination with
To avoid loss of communication on an installed camera, the COMMUNICATION ON/OFF selection is NOT available while using remote control. This function can only be accessed with the camera buttons.
Bosch Security Systems