LTC 2210 Series Instruction Manual Contents | EN 5 |
|
|
Table of Contents |
| |
Important Safeguards | .2 | |
FCC Information | .3 | |
1.0 | UNPACKING | .6 |
1.1 | Parts List | .6 |
2.0 | SERVICE | .6 |
3.0 | DESCRIPTION | .6 |
4.0 | INSTALLATION | .6 |
4.1 | Power | .6 |
4.2 | Mounting | .6 |
4.3 | Video Looping Input | .6 |
4.4 | Monitor Output | .6 |
4.5 | Alarm/Accessory Connector | .7 |
4.6 | Programming System Setup | .7 |
5.0 | OPERATION | .7 |
5.1 | Key Operation | .7 |
5.2 | Alarm Enable | .7 |
5.3 | Zone Setup | .8 |
5.4 | Defining a Zone for Motion Detection | .8 |
5.5 | Adding a Zone | .8 |
5.6 | Editing, Moving or Deleting a Zone | .8 |
5.7 | Detection Sensitivity | .9 |
5.8 | Percentage Movement For Detection | .9 |
5.9 | System Setup | .9 |
5.10 | Factory Defaults | .9 |
5.11 | Display | 10 |
5.12 | Language | 10 |
5.13 | Operation and Setup | 10 |
6.0 | ILLUSTRATIONS | 11 |
Bosch Security Systems December 17, 2004