LTC 2210 Series Instruction Manual Operation | EN 10 |
|
|
5.11 Display
The display menu is used to configure how the motion detector looks on the monitor screen.
| Display |
|
|
|
| >PREVIOUS MENU |
|
| |
| DISPLAY ZONE | OFF |
| |
| BACKGROUND | OUTLINED |
| |
| ALL ACTIVITY | OFF |
| |
| OVERSCAN | 05 |
| |
| Select: |
| ENTER |
|
| Exit Menu:ESC Scroll: | ↓ |
| |
|
|
|
|
|
| Item | Settings | Description |
|
| DisplayZone | ON/OFF | Switching this option on |
|
|
|
| displays the defined active |
|
|
|
| zones during operation. |
|
|
|
| This is useful when |
|
|
|
| programming and adjusting |
|
|
|
| the motion detector. |
|
| Background | OUTLINED/ |
|
|
|
| SOLID | This allows the menu |
|
|
|
| background to be changed |
|
|
|
| from a solid black |
|
|
|
| background to a |
|
|
|
| transparent background, |
|
|
|
| where the menu text is |
|
|
|
| fringed. |
|
| ALL |
|
|
|
| ACTIVITY | ON/OFF | Switching this option ON |
|
|
|
| displays Motion Tracer dots |
|
|
|
| on the monitor screen for |
|
|
|
| all movement, even if it is |
|
|
|
| not sufficient to be |
|
|
|
| detected as motion. |
|
| OVERSCAN |
|
|
|
|
| 00 | Full Video, no reduction |
|
|
| 052 | Reduces video by 5% |
|
|
| 10 | Reduces video by 10% |
|
|
| 20 | Reduces video by 20% |
|
|
|
|
|
|
1.The LTC 2210 can detect motion over the full active video signal, however all of this cannot be displayed on the video monitor as most video monitors cannot display the entire active video signal. This parameter allows the video area where detection zones are defined to be restricted so that the full detection area can always be seen on the display monitor.
Changing the OVERSCAN setting reduces the video area where zones are drawn.
2.An Overscan Setting of 05 (5%) will display the complete detection area on most video monitors.
5.12 Language
Use the Language option on the main menu to change the language. Press ENTER to select the required language. All screens will now be displayed in the selected language.
The options are: English, French, German, Spanish, Dutch, and Italian.
5.13 Operation and Setup
Most programmable options are set to values that should work without change for most applications. It is normally only necessary to define the area where motion should be detected. To do this press the SETUP key to enter the programming. Select Zone Setup followed by Define Zone. Define a Zone where you wish to detect motion. Press ESC several times to leave programming.
Bosch Security Systems December 17, 2004
