Bosch Appliances MIYN46 Safety Instructions, Introduction, Environmental conditions, 2.1.1, 2.1.2

6 en Safety InstructionsMIYN46 Wall Transmitter

2 Safety Instructions

WARNING!

! The User / Installer should read and understand this chapter before any intervention on the MIYN46 Wall Transmitter.

2.1		Introduction
2.1.1		Principle
	i	NOTICE!
		In case of unclear information, please contact your local representative.
2.1.2		Importance of safety instructions

Each safety and protection instruction in this manual must be adhered to in order to avoid personnel injuries, property damages or environmental pollution.

In a similar manner, the legal bylaws, the measures in prevention of accidents and for the pro- tection of the environment, as well as the recognized technical rules aiming at appropriate and safe working conditions which as applied in the country and at the place of use of the MIYN46 Wall Transmitter must be adhered to.

2.1.3	Disregarding safety rules
	Disregarding the safety rules, as well as existing legal and technical regulations, may lead to
	accidents, to property damages or to environmental pollution.

2.2	Environmental conditions
	WARNING!
	The MIYN46 Wall Transmitter must not be located near a water tap or any other source of
!	water.
	The electrical safety of the MIYN46 Wall Transmitter is only guaranteed if the electrical instal-
	lation is in accordance with the national regulations and if this installation works properly.
	The MIYN46 Wall Transmitter may not be used in buildings prone to fire and explosion haz-
	ards.
!	CAUTION!
	The MIYN46 Wall Transmitter may not be used under exposure to the direct sunlight, to heat,
	to dust or to an excessive humidity (only use the equipment in a clean environment).
	 Install the MIYN46 Wall Transmitter in a dry place, away from any source of heat.
!	CAUTION!
	Interferences
	Avoid immediate proximity to other electric devices such as a television.

970.035b F.01U.278.521 v2.0 2012.12 User Manual US Bosch Security Systems