Bosch Appliances nbn-932 Malfunction, Possible causes, Solution, LIVEPAGE Functions

36 en Troubleshooting		DinionHD 1080p HDR
Malfunction	Possible causes	Solution
No audio	Hardware fault.	Check that all connected
transmission to		audio units are operating
remote station.		correctly.
	Faulty cable connections.	Check all cables, plugs,
		contacts and
		connections.
	Incorrect configuration.	Check audio parameters
		on the Audio
		configuration and
		LIVEPAGE Functions
		pages.
	The audio voice	Wait until the connection
	connection is already in	is free and then call the
	use by another receiver.	sender again.
The unit does not	Alarm source is not	Select possible alarm
report an alarm.	selected.	sources on the Alarm
		sources configuration
		page.
	No alarm response	Specify the desired alarm
	specified.	response on the Alarm
		connections
		configuration page; if
		necessary change the IP
		address.
Control of cameras	The cable connection	Check all cable
or other units is not	between the serial	connections and ensure
possible.	interface and the	all plugs are properly
	connected unit is not	fitted.
	correct.
	The interface parameters	Make sure that the
	do not match those of the	settings of all units
	other unit connected.	involved are compatible.

AM18-Q0614 v1.0 2012.03 Installation Manual Bosch Security Systems