Bosch Appliances PCH 615 FAU, PCH 612 DAU, PCH 615 DAU installation instructions Service, Contents

Service

Contents

Trouble shooting chart

It is not always necessary to call the Service Centre. In some cases, you may be able to solve the problem yourself. This table contains some useful information.

Important:

Only authorised personnel from the Service Centre are qualified to work on the main gas and electric systems.

Contents	3
Safety considerations	4
For your safety	4
What to do if you smell gas	4
Warnings	4
Installation	6

What’s wrong	Possible cause	Solution
...If none of the electrical	• Power turned off.	• Turn power on.
systems work.	• Faulty fuse.	• Check the fuse in the main
		fuse box and replace if faulty.
	• The automatic circuit	• Check to see if the circuit
	breaker or mains.	breaker or a differential has
	differential has been	been triggered in the mains
	triggered.	supply box.
...If the electronic ignition	• There may be food or	• The gap between the spark
system does not work.	cleaning product	plug and the burner needs to
	particles between the	be cleaned carefullly.
	spark plugs and the
	burners.
...If the flame on the	• The burner components	• Put the components in their
burners is not evenly	have not been	correct positions.
distributed.	assembled properly.
	• The gas ports on the	• Clean the gas ports on the
	burners are dirty.	burners.
...If the gas flow does not	• The isolation valve is	• Open the isolation valve.
seem normal or there	closed.
is no gas flow at all.	• If the gas is supplied	• Replace the gas bottle with a
	from a gas bottle, it	full one.
	may be empty.
...If the kitchen smells	• One of the valves has	• Check to see if a valve has
of gas.	been left open.	been left open.
	• Possible leak on the	• Check that the coupling on
	gas bottle coupling.	the gas bottle is in order.
...If the safety cut-off	• The control knob has	• Once ignited, keep the
devices on the different	not been kept	control pressed in for a few
burners do not work.	pressed in for long	seconds.
	enough.
	• The burner ports are	• Clean the burner ports.
	dirty.

Preparing to install	6
Clearances	7
Installation of cooktop into kitchen bench	7
Installation procedure	7
Connection	8
Electrical connection	8
Gas connection	8
Conversion from Nat. Gas to Propane Gas ....	9
To change injectors	9
Injector size chart	9
Minimum flame adjustment	10
Operating instructions	11
Burner location	11
Burner ignition & control	11
User instructions	12
Boiling burners	12
Wok trivet	12
Wire coffee support	12
Cleaning and care	13
Do’s	13
Don’t	13
Service	14
Trouble shooting	14
Wiring diagram	15
Service contact telephone numbers	15

14 3