Door Paneminstallation
. DOOR PANEL mNSTALLATmON
1/4" max,
; ram) _
(5s6
_ | J |
Figure 16
C
A
Figure 17
SH U/SH E ModeJs - Accessory Panel lnstaJtation Ufyou have an SHU/SHE modeUand have ordered an accessory paneUkit, install the paneUprior to sliding the dishwasher into pUace.The paneUdimensions are shown in Figure 16.
SHI Modets - Panet Installation
SHUmodeUscome with additionaUmounting hardware and a tempUatesheet with installation instructions. The stain° UesssteeUmodeUs of the SHUseries aUsocome with two extension pieces. The extension pieces are used to match the control panel height (Figure 17, "B" dimension) to the horizontal drawer line of the cabinets, and must be installed as shown in on the template sheet. The standard piece is used for drawer heights up to 6" (152mm); the long piece is used for drawer heights greater than 6" (152mm) but 6o7/16" (164mm) or less. Ifyou r drawers are taller than 6o7/16", you can either slide the extension piece in as far as it will go, or remove it and fit the door panel directly below the control panel.
SIll/SHY Models - Panel lnstaJlation
SHV models come with additional mounting hardware and a template sheet that will show you how to mount the panel. One side of the template shows how to mount a one piece panel; the other side shows how to mount a two piece panel. Decide which type of installation you want before proceeding with the installation.
| Extension "A" |
|
| |
Fig. 17 | Max, | oMino | "B .... | C" |
Dimension | Standard | Long |
| Max,=Mino |
|
| |||
SHI Only | 5/16- 11/16" i11/16- 1 1/8" | 55/!6" | ||
| i(18 - 29mm) | (!35mm) | (143 - 164mm) | |
Fig. 18 | Panem Dimension | ||
Dimension |
|
| |
|
| 20 11/16" - 25" | |
D | (SHJ) | (526turn | - 635mrn) |
| E | 27 3/!6" | - 30 5/16" |
(SIll | & SHV) | (690mm | - 770mm) |
| F | 23 [€/16" - 23 3/8" | |
(SHI | & SHV) | (589mrn | - 594turn) |
