PlacingtheDishwasher/SecuringtheDishwasher

_L14"
355mm) _/
J
Figure 19
HotWater Supply Line
and Electrical Supply
CablePosition in
Channels J
Figure 20

PLACmNG THE DISHWASHER

1 Straighten and position the hotwater supply line and
the electrical supply cable as shown in Figure 19 so
that they wiii align with their channels under the
dishwasher base,
2 Position thedishwasher close enough to the enclosure
so that you can runthe dishwasher drain hose to the
under sink drain connection, Make certain that the hot
water supply line and the electrical supply cable are in
their channels under the dishwasher base, as shown in
Figure 20,
3Slide the dishwsher into the opening making sure that
the hot water supply line and the electrical supply
cane stay in their proper channels,
4 Make sure thedishwasher is level,Adjust the rear
leveler by turning the center screw at the front of the
dishwasher, asshown inFigure 21a, Turning the screw
clockwise raises the rear of thedishwasher, Adjust the
front levelers by turning them with a screwdriver, as
shown in Figure 21b, Turning the levelers to the right
raises the dishwasher, ifadditional height isneeded,
shims may be added under the leveler feet,

SECURING THE DISHWASHER

1 Drive the mounting screws through the hobs in the
mounting brackets as shown inFigure 22 for Top or
Side Mount.
f
Figure 21

10

Figure 22