TOOLS & MATERIALS NEEDED
Tools Needed for Installation
Hammer | Hole saw or 1” hole cutter |
Pipe wrench, 2 reqd. | Tape Measure Slotted screwdriver (#2) | |
Adjustable wrench, | Wire Cutter | Phillips screwdriver (#2) |
| ||
(size med., 2 reqd.) |
|
|
| Torx screwdriver, #20 |
Wire stripper | Electric Drill |
| |
| Level |
Figure 1
Materials Needed
1 | Electric Connection - 2 conductor, 1 ground |
insulated electrical supply cable (30” or | |
| sufficient length for your installation). |
2 | Hot Water Supply Line - Minimum 3/8” |
O.D. copper tubing or metal braided | |
| dishwasher supply line. |
3 | |
supply line. | |
4 | 90° elbow with 3/8” N.P.T. external threads |
on one end and sized to fit your water |
supply line on the other end.
5
6
7
Teflon tape or other pipe thread compound which help seal plumbing connections.
3
UL listed conduit connector or strain relief.
Additional materials may be required to comply with local codes.
Figure 2
www.boschappliances.com ENGLISH - 3