Bosch Appliances SHX99A15UC, SHV99A13UC manual Loading the Top Rack, Bottom Rack Accessories

Figure 9

Preparing and Loading the Dishware (continued)

Top Rack Accessories

Knife Rack

The knife rack is an extra shelf for knives and other large utensils. It is assembled onto an edge of the upper rack.

Figure 5

Place knives with sharp sides down, see Fig. 5.

Loading the Top Rack

Figure 6 shows	Figure 6
how to arrange
a typical mixed
load in the
top rack.

Figure 7

NOTE: When pushing the top rack into the dishwasher, push it until it stops against the back of the tub. Otherwise, the top rack spray arm may not connect to the water supply.

Bottom Rack Accessories

Flip Tines

Flip Tines fold down to make loading the racks easier in some instances.

Grasp the tines

as shown in Figure 9 and fold the tines downward.

Rack Attachment

The rack attachment has two additional cup shelves upon which to place cups and large kitchen utensils. The rack attachment is as- sembled on the rear edge of the lower rack.

To assemble:

Slide the Rack Attachment in, Figure 11, keeping the longest tines on the inside of the top basket wire (a) and on the outside of the lower basket wire (b), see Fig. 10.

The short tines will snap into place, see Figure 12.

Figure 11

Figure 7 shows how to arrange items from

atypical 10 place setting in the top rack.

	Figure 10
	Rear
a	corner
	view of
	Rack
b	inset

	(AHAM DW-1 10 Place Setting)
	Figure 8
Figure 8 shows	Figure 12
	Rack Attachment
the top rack	Use
load pattern	To use the rack
for 12 place	attachment, fold
settings.	down the cup
	shelves and place
	items to be
	washed, see
	Figure 12.
	(AHAM DW-1 12 Place Setting)

6