Bosch Appliances THE DCN manual

SC & SI Remote Interface Description

en SC & SI Remote

Interface Description

Contents

Main Page 1 Introduction 1.1 Purpose 1.2 Scope 1.3 Definitions, Acronyms and Abbreviations 1.4 References 2 System configuration and system installation 2.1 Introduction 2.2 Remote System Configuration and System Installation 2.3 System Modes Page 3 System Configuration Functions 3.1 Introduction 3.1.1 Remote function item explanation 3.2 SC_C_CHECK_LINK 3.3 SC_C_START_DCN 3.4 SC_C_STOP_DCN 3.5 SC_C_GET_CCU_VERSIONINFO Page 3.6 SC_C_GET_CCU_CONFIG 3.7 SC_C_START_DQS 3.8 SC_C_STOP_DQS 3.9 SC_C_MAINT_CCU_DB 3.10 SC_C_DOWNLOAD_CCU_DB 3.11 SC_C_CLEAR_CCU_DB 3.12 SC_C_CCU_APPLY_ONE 4 System Configuration notifications 4.1 Introduction 4.1.1 Update Notification item explanation 4.1.2 Unit/user event relations SC & SI Remote Interface Description en | 16 Bosch Security Systems B.V. | 2003 December | SC & SI Remote Interface Description Remote Controller connected to the Master CCU 4.2 SC_C_CCU_REBOOT 4.3 SC_C_CONNECT_UNIT 4.4 SC_C_DISCONNECT_UNIT 4.5 SC_C_CONNECT_SLAVE_CCU 4.6 SC_C_DISCONNECT_SLAVE_CCU 4.7 SC_C_CCU_MODE_CHANGE 5 System Installation Functions 5.1 Introduction 5.2 SI_C_START_INSTALL 5.3 SI_C_STOP_INSTALL 5.4 SI_C_SELECT_UNIT 5.5 SI_C_SET_MASTER_VOL 6 System Installation notifications 6.1 Introduction 6.1.1 Unit/user event relations 6.2 SI_C_REGISTER_UNIT SC & SI Remote Interface Description en | 23 APPENDIX A. VALUES OF THE DEFINES Page APPENDIX B. ERROR CODES Page APPENDIX C. EXAMPLES C.1. Assigning seats using global installation C.2. Replacing defective units during operation Page APPENDIX D. ERROR CODES