Bosch Appliances WFR 2460, WFR 2450 manual Fuse

Program has already started; when a program hasReselect program; see Page￿26. Before starting the started, the end time can no longer be selectedprogram,. select and start the desired end time; see

Page￿19.

￿￿ult	Possibl￿ c￿us￿	Action
Control lights do notA fuse has triggered.		Switch on/replace the	fuse.
shines.		Call Customer Service	if this fault is repeated.
	Power failure.	An interrupted program will be resumed when power
		returns. If the laundry	is to be removed during
		a￿power failure, proceed as described under
		•Emergency lock release"; see￿Page￿29.

Program does not start. ￿t￿rt/P￿us￿ indicator light flashes.

Appliance is in energy6saving mode. This is not a fault.

￿t￿rt/P￿us￿ button not pressed.

Press the￿￿l￿ct button; energy6saving mode is terminated.

Press the￿t￿rt/P￿us￿ button.

Program does not start.

•Door open?" indicated in the display field.

•Press start" is indicated in the display field.

Loading door not	closed properly.	Check whether laundry is trapped in door.
		Close the loading door (a click should be heard).
		Program continues.
End time selected	but still not activated	by pressingPress the￿t￿rt/P￿us￿ button.
the ￿t￿rt/P￿us￿" button.

Program does not		End time selected and activated.	None. Appliance starts automatically.
start. •Time	delay"	is
indicated in	the
display field.

Clock cannot be setProgram. has already started; when a program hasWait until program ends. started, the clock cannot be set.

•Set clock:" text remains in the display field even though theM￿nu button has been pressed.

The setting has switched from hours to minutes;None. both selection points have the same text.

•--:--" is	Clock not set.
displayed instead	of
the end time in the
display field.

End time cannot beClock not set. selected.

Set clock; see Page￿24.

Set clock; see Page￿24.

36