Bosch Appliances WFR 2460, WFR 2450 manual Fault Displays

Fa￿￿￿	P￿￿￿￿b￿￿ ca￿￿￿			Ac￿￿￿￿
Program duration	This is not a fault.			Add a more appropriate amount of detergent next
extended.	The foam detection feature has activated an			time.
	additional rinsing cycle to reduce the amount of
	foam.
	This is not a fault.			Always	load largea￿d small items together into the
	The imbalance compensation system is attemptingdrumto .
	balance the load through repeated spins.
Unsatisfactory	The	degree	of soil was higher than estimated. Select		suitable program
washing result.				or
				P￿w￿￿	Wa￿h as an additional option.
	Not	enough	detergent.	Add detergent according to the manufacturer's
				specifications.
Detergent residue onSome phosphate3free detergents contain				Brush	off spots when laundry is dry.
the laundry.	water3insoluble residues that may appear as			light
	spots on the laundry.

Grey residues on theDirt accumulation from ointments, fats or oils. laundry.

Add the maximum amount of detergent and select the highest permissible temperature next time.

Fault	displays
T￿x￿ ￿￿ d￿￿￿￿ay f￿￿￿dP￿￿￿￿b￿￿ ca￿￿￿		Ac￿￿￿￿
•Water tap	closed?" Water tap not turned on.	Turn on	water tap.
		Program	continues.

Supply hose kinked or trapped.

Strainer in supply hose clogged.

Water pressure too low.

Eliminate the cause.

Clean the filter; see Page￿32.

Eliminate the cause.

•Pump blocked?"	Loose debris is blocking the pump.	Clean	the	pump (refer to Page￿31).
	The water drainage pipe and/or drain hose is	Clean	the	water drainage pipe and/or drain hose.
	blocked.

•Door open?" Loading door not closed properly.

Check whether laundry is trapped in door. Close the loading door.

If the	fault	cannot be eliminated with the		aidIf ofthe fault recurs, call customer service; see
the above		table:	switch the appliance off,	waitPage￿34.
5￿seconds, switch the appliance on again,
select	and	start	the program.

38