Moisture Sensor
Occasionally the moisture sensors will need cleaning, due to a
See Figure 10.
Figure 10.
SERVICE and REPAIR
The Bosch dryers require no special care other than the care and cleaning noted above. If you are having
a problem with your dryer, before calling for service please refer to Table 2,
If you are having a problem with your Bosch dryer and are not pleased with the service you have received:
First, please contact your installer or the Bosch Authorized Service Contractor in your area and explain to them why you are not satisfied. This will usually correct the problem.
If after working with your installer or service person the problem still has not been resolved to your satisfaction, please let us know by either writing to us at,
BSH Home Appliances
5551 Mc Fadden Avenue
Huntington Beach, CA 92649
or, calling us at,
1-800/944-2904.
Frost Protection (WTL models only)
The WTL models, since they remove moisture by condensing the water out of the air and then pumping the water to drain, should never be installed in an area subject to freezing. Also, if the dryer is to be transported where it would be subjected to freezing the dryer must be completely emptied of water before transporting.
Please be sure to include, if writing, or have available, if calling, the following information:
Model Number
Serial Number
Date of Original Purchase
Date Problem Originated
Explanation of Problem
Also, if writing, please be sure to include a daytime telephone number and a copy of the sales invoice.
You will find the model number and serial number information on the rating plate located on the inside of the door above the lint filter. See Figure 1.
12
