7.Select ADDITIONAL FUNCTIONS, if desired
The additional functions available are accessible by depressing the buttons:
``Delicates''
The ``Delicates'' button, see Figure 5, will reduce the drying temperature and lengthen the drying time when depressed. It is recommended that the ``Delicates'' button be depressed when drying heat sensitive fabrics, such as, acrylics. Be sure to follow the instructions listed on the care label instructions.
``End of Cycle Signal''
When the ``End of Cycle Signal'' button, see Figure 5, is activated there will be a signal sounded at regular intervals at completion of the selected program.
The volume level of the sound may be changed by holding the button in until desired volume level is reached. This volume level will be stored for future use until altered.
The end of cycle signal can be switched off by depressing the button again. The indicator light above the button will turn off to indicate that the signal is no longer selected.
8.Press the `Start'' Button
Depress the `Start'' button. The indicator light above the `Start'' button will become illuminated and the machine will start. If one of the Auto Cycles has been selected the Duotronic system will continuously monitor the moisture level of the load and display the progress in the ``Moisture Level Indicator Lights.'' If a timed cycle has been selected, either Heated Dry or Air Fluff, the minutes remaining in the program will be shown in the ``Cycle Countdown Display.''
The program will continue to the end, when the ``End'' indicator lamp will become illuminated.
And if the ``End of Cycle Signal'' has been selected a signal will sound.
Note: If using the Auto program at the beginning of the cycle there will be numerous rotations in each direction with complete stops in between for approximately 90 seconds. There is nothing wrong with the machine,
it is taking a reading on the moisture of the load to determine how long to dry.
Note: If the load is not removed, the drum will, for the following 35 minutes, rotate at brief intervals to prevent wrinkling
Figure 5.
9.Depress the ``Door'' button The door will open.
10.Remove the Laundry from the Dryer
11.Clean the Lint Filter
The lint filter, located in the door, should be cleaned after each load. Cleaning the filter will shorten drying times and save energy.
12.Turn Off the Dryer. Depress the ``On/Off'' button.
10
