MENU | FUNCTION | FUNCTION DESCRIPTION |
|
|
|
INFORMATION
INPUT SELECT
OSD WARNING
NO SIGNAL
Provide information about resolution, H/V frequencies, and polarity of the input signal.
This OSD reports the current signal being displayed.
This OSD will automatically turn off after 2 seconds; you can also press the Exit key to close it.
This OSD gives a warning when the selected input signal is not active. After power on or when the input signal becomes inactive, this warning appears.
No signal OSD is shown after
0.5seconds from video mode detection. This OSD turns off automatically after 5 seconds, or when you press the Exit key. It then changes to the power saving mode. If the direction key is pressed during power saving mode, this warning OSD opens again.
16 SD2620W
