![](/images/new-backgrounds/1195600/19560025x1.webp)
Connect the cables
The SD2620W unit comes with one
1. | Plug one end of the |
|
| cable into the primary port of |
|
| the |
|
| card. Plug the other end into |
|
| the bottom monitor of the |
|
| SD2620W unit. |
|
2. | Plug one end of the |
|
| cable into the secondary output |
|
| of the |
|
| card. Plug the other end into |
|
| the input port (labeled “IN”) of |
|
| the |
|
3. | Plug one end of the | Short DVI cable installed |
| cable into the output port of the | |
|
|
The two monitors must be connected with an