Maintenance | After Trimming/Storage |
|
|
Before any work on the machine itself, re- move battery from machine.
Note: To ensure long and reliable service, carry out the following maintenance regularly.
Regularly check for obvious defects such as loose fixings, and worn or damaged components.
Check that covers and guards are undamaged and correctly fitted. Carry out necessary maintenance or repairs before using.
If the trimmer should happen to fail despite the care taken in manufacture and testing, repair should be carried out by an authorized customer service agent for Bosch garden products.
For all correspondence and spare parts orders, al- ways include the
DBlade Maintenance
Before any work on the machine itself, re- move battery from machine.
To remove the worn blade 16 push in direction of the arrow until it snaps off the pivot 17.
Clean the pivot 17 of any residual plastic/debris with a sharp knife.
To refit the new blade 16 place the eyelet over the pivot 17 and pull outwards until it snaps into place.
Note: Only use Bosch replacement blades. They have been developed specially for improved cutting performance. The use of other cutter blades will lead to a deterioration in performance and possible dam- age to the product.
Stop and remove battery from product. En- sure battery is removed before storage.
Clean the exterior of the machine thoroughly using a soft brush and cloth. Do not use water, solvents or polishes. Remove all grass and debris, especially from the ventilation slots 7.
Turn the machine on its side and clean the cutting guard 8 inside. If grass cuttings are compacted, re- move with a wooden or plastic implement.
Battery should be stored between 0 – 45 °C; incor- rect storage could result in the battery being dam- aged.
15 • F016L70 457 • 06.12 | English - 4 |
