Bosch Power Tools DGSH181BN Assembly, Installing Accessories Spindle Lock Wrench, Shank Accessory

! WARNING

! WARNING

BM 2610034444 04-14_DGSH181 4/2/14 11:24 AM Page 10

Assembly

Disconnect battery pack from tool before making any assembly,

!WARNING adjustments or changing accessories. Such preventive safety measures reduce the risk of starting the tool accidentally.

SELECTING GRINDING ACCESSORIES Before using a grinding wheel point or cone, be certain

that its maximum safe operating speed is not exceeded by the nameplate speed of the grinder. Do not exceed the recommended wheel point or cone diameter of 2 inches.

INSTALLING ACCESSORIES

B

FIG. 2

SPINDLE LOCK

WRENCH

19 MM

Be sure that the diameter of the shank is the same size

as the inside diameter of the collet.

		To prevent damage to collet,
!	CAUTION
		avoid excessive tightening of

the collet nut when there is no accessory inserted.

Only use properly fitting and undamaged open-end 19 mm wrenches.

1.Place a (19 mm) open-end wrench onto the spindle to prevent the spindle from rotating (Fig. 2).

2.Hold wrench in place and rotate collet nut counter-clockwise with another (19 mm) open-end wrench.

3.Insert three fourths of shank of accessory into the collet and securely tighten collet nut clockwise.

REMOVING ACCESSORIES

Repeat steps 1 and 2 of above and remove accessory.

SHANK OF

ACCESSORY

	COLLET NUT
	WRENCH
COLLET	19 MM

-10-