BM 2610021461 06-12_BM 2610021461 06-12.qxp 6/26/12 1:38 PM Page 24
FIG. 41
Dust Extraction Hood | M4 Thumb |
(Optional Accessory) | Screws |
EDGEFORMING DUST
EXTRACTION HOOD RA1175
Do not reach in area of the ! WARNING bit while the router is ON or
plugged in. To avoid entangling hoses, do not use this dust extraction hood at the same time as any other dust extraction hood.
This dust extraction hood (optional accessory) is used for dust collection when
FIG. 42
ROUTER
SUBBASE
WORKPIECE
EDGEDUST EXTRACTION HOOD
ATTACHING DUST EXTRACTION
HOOD
You can attach the
—over the router’s
FIG. 43
PLUNGE BASEM4 x 16mm
SCREW
SUBBASE
M4 x 16mm | DUST EXTRACTION |
SCREW | HOOD |
DELUXE ROUTER GUIDE
(Not included, available as accessory)
The Bosch deluxe router guide is an optional accessory that will guide the router parallel to a straight edge or allow you to create circles and arcs.
The deluxe router guide is supplied with two rods and screws to fasten the guide (Fig. 44). In addition, it features a fine adjustment knob and indicator for accurately positioning the edge guide relative to the bit. With the guide installed and adjusted, the router should be fed normally, keeping the guide in contact with the edge of the workpiece at all times. The deluxe router guide may also be positioned directly under the router base for operations where a cut is needed close to or at the edge of the work.
The deluxe router guide includes a dust extraction hood and the VAC002 vacuum hose adapter.
For complete instructions on installation and operation, please refer to the instructions which are included with this accessory.
